#StudioEquipment - Modal Electronics SKULPT SE Synthesiser (Modal Electronics) ~ Lurid House Live

SKULPT SE is a powerful portable performance synthesiser that allows musicians to perform and compose anywhere. This lightweight USB or battery-powered synthesiser features a unique 32-oscillator virtual analogue sound engine. Its mighty synth architecture features 2 WAVE groups, incorporating four oscillators per voice, a morphable 2-Pole resonant Filter plus a comprehensive 12-slot modulation matrix and digital effects.

The integrated Arp and 256-note Sequencer allows to play rhythmic patterns and melodies automatically. SKULPT supports MPE for next-generation expressive performances. Musicians, DJs and producers find 128 exciting preset sounds to start their synth adventure right out of the box. The free MODALapp and MODALplugin for all primary computer and mobile platforms integrates easily with any VST3 and AU compatible recording environment. SKULPT SE is fully cross-compatible with its predecessor SKULPT and both units can be polychained and exchange patches with each other.

Based on the heritage of the original SKULPTsynthesiser, SKULPT SE inherits the same slim form factor as its predecessor, but now comes with traditional black & white touch keypads, easier to read front panel descriptors and improved built quality. Add to this 127 high energy patches, a stellar sound engine, MPE support, plus patch and polychain compatibility with its predecessor, SKULPTsynth SE is set to empower musicians, producers and performers to create anywhere!

Firmware v2.1 is now available for Modal Electronic's original SKULPT, introducing a range of enhancements and workflow improvements. The all-new SKULPTsynth SE presets are now compatible with the original SKULPT. For your convenience, a summary of the firmware update highlights is included below:

New Features:
Support for SKULPTsynth SE

Improvements:
Updated Factory Content (SKULPTsynth SE Only)
Changed default state of 'MIDI-IN OCT OFFSET' to 'on' during factory reset
Fixed inconsistent behaviour immediately after a factory reset
Improved the factory reset procedure LED feedback

Fixes:
Fixed an issue where fine tuning would not be zero after initialising a patch

Specifications:

Polyphony:
Four voices virtual-analogue

Oscillators:
32 oscillators, 32 oscillators, 8 per voice, split into 2 WAVE groups
Individual waveform morphing for WAVE group
Available waveforms WAVE 1: Sine - Triangle - Saw - Square - PWM
Available waveforms WAVE 2: Sine - Triangle - Saw - Square -Noise
Multi option Unison / spread to detune the 32 oscillators for massive sounds
FM, PWM, tuning and Ring Modulation options
Mixer section for WAVE levels

Filter:
Analogue-style morphing 2-pole filter with resonance
Seamless morphing from lowpass, through bandpass, to highpass

Modulation:
3 x envelope generators for Filter, Amplitude and Modulation
2 x audio rate LFOs, one global and one polyphonic
8-slot modulation matrix with eight sources and 37 destinations

Sequencer and Arpeggiator:
Realtime sequencer that will record up to 256 notes and up to 4 parameters of Animation
Fully-featured arpeggiator with division, direction, octave, bipolar swing and sustain controls

FX:
Distortion (waveshaping overdrive)
Stereo Delay with modulation, sync to internal and external tempo sources

User Memory:
128 sound memory locations
64 sequence memory locations

Controls and Performance
16-key touch MIDI keyboard
14 endless encoders and 13 buttons to access synth parameters for sound programming and real-time tweaks while performing
Compatible with MPE enabled MIDI controllers for expressive performance articulations
Monophonic, Duophonic and Polyphonic play modes available

Inputs and Outputs:
3.5 mm / 1 / 8" TRS dual-mono output
3.5 mm / 1 / 8" TRS headphone output
MIDI DIN In and Out
3.5mm / 1 / 8" Analogue clock sync In and Out
Class-compliant MIDI over USB connection

Power:
Powered by USB or 6 x AA batteries. USB cable included
Editor Software: Free editor app available for macOS, Windows, IOS, iPadOS and Android
Enclosure: Lightweight and durable hard plastic enclosure with removable protection lid

General:
Dimensions: 255mm x 135m x 68mm (10"x5 1 / 2"x 3")
Weight: 0.62 kg / 1.37 lbs (without batteries)

If you decide an equipment item is not suitable within 10 days of delivery, you can return it to us for a replacement or refund. Returns must be unused and in their original, undamaged packaging.

Some items are excluded from our money back guarantee, including:
• Computer software that has been unsealed or registered
• Any item that comes directly into contact with the nose, ears or mouth

To arrange a return, just contact our customer service department on 020 7424 2800 or email us at support@juno.co.uk

Adblock test (Why?)

from Juno Records: Studio Equipment - New Releases https://ift.tt/3bVobvu